Coverage Type

These selections are radio model / option dependent.

SELECTIONS:

Available When:

Disabled = SmartNet

When the radio is model / option capable of SmartZone, disabling this field causes the Trunking System to use SmartNet.

SmartNet operation amounts to single site SmartZone.

SmartZone

SmartZone operation allows the radio to determine through Received Signal Strength Indication (RSSI) polling samples, the best Trunking Site to be used for SmartZone-enabled Trunking channels.

For ASTRO 25 Systems: Operation is limited to Sites within a single Zone of a single Trunking System.

For Type II Systems: Operation is limited to the Sites within a single Trunking System.

SmartZone & OmniLink

OmniLink gives the SmartZone-capable radio the ability to roam from one SmartZone Zone to another SmartZone Zone within the same OmniLink System. OmniLink applies for OmniLink-enabled Trunking channels.

For ASTRO 25 Systems: Operation is limited to Sites and Zones within a single OmniLink System.

For Type II Systems: Operation is limited to Sites within a set of interconnected Trunking Systems.

Intra-WACN Roaming

Intra-WACN Roaming gives the Project 25-capable radio the ability to automatically roam between all of the System IDs within the same Wide Area Communication Network without any user intervention (see also Home WACN ID)

For ASTRO 25 Systems: Operation is limited to Trunking Systems within a single Wide Area Communication Network (WACN).

This selection is invalid if one of the following scenarios is true:

When the System Type is Type II,

Or

(when the Dual Radio - Radio Selection field is set to "Secondary Radio" and

when the Enable Secondary Radio Tx field is "Disabled").

Inter-WACN Roaming

Inter-WACN Roaming gives Project 25-capable radios on selected talkgroups the ability to automatically roam across different Wide Area Communications Networks (WACNs) without any user intervention.

This selection is invalid if one of the following scenarios is true ...

when the System Type is Type II,

Or

when the DVRS Hardware Enable field s enabled,

Or

(when the Dual Radio - Radio Selection field is set to "Secondary Radio" and

when the Enable Secondary Radio Tx field is "Disabled").

Or

when this System is LTE Broadband enabled. A Trunking System is LTE enabled when a referenced Data Profile having a Data Profile Type selection equal to "Trunking & Broadband" or "Broadband-Only", and when that Data Profile's Broadband Source is "Internal LTE Modem"

SmartZone-capable and Project 25-capable systems are also configured from the Trunking Wide SmartZone fields and from the Trunking Wide Filter Constants fields.